To compress a video for Discord, re-encode it as an H.264 MP4 at a bitrate that fits your upload limit, which is 20MB on a free account as of 4 November 2026. Divide your target size by the clip's length to get the bitrate, then use a two-pass encode in HandBrake or ffmpeg, or a browser tool if you only need it once. Most guides still say 10MB, but Discord doubled the free limit in August 2026, so you have twice the room they assume.

Kenerate doesn't compress video, so this guide uses free tools from other developers. Everything below was checked against Discord's own help pages, and we ran the ffmpeg commands ourselves on 4 November 2026.

What is Discord's upload limit in 2026?

Discord's File Attachments FAQ puts the free limit at 20MB, up from 10MB, as of August 2026. Paid plans and boosted servers go higher.

Your situationUpload limit per fileSafe target
Free account20MB19MB
Nitro Basic ($2.99 a month)50MB47MB
Server at Boost Level 250MB (that server only)47MB
Server at Boost Level 3100MB (that server only)95MB
Nitro ($9.99 a month)Up to 1GB950MB

The limits and prices come from Discord's File Attachments FAQ, Nitro page and Server Boosting FAQ. The safe targets are our own suggestion. Discord doesn't say whether its "MB" means 1,000,000 or 1,048,576 bytes, so aiming about 5% under works either way.

Two more details are worth knowing:

  • Discord says it is experimenting with upload sizes, so some accounts may see a different limit.
  • Some servers can buy a 250MB file limit with Boosts, which Discord also describes as an experiment.

If an old guide tells you to hit 8MB or 10MB, it's out of date. Those targets still upload, but you throw away half or more of your quality budget.

Why does my phone video fail when it used to work?

Since August 2026, Discord checks file size before compression on mobile, the same way desktop always has. Previously the app tried compressing your clip first and only rejected it if it was still too large.

Discord's FAQ says this helps desktop and iOS users overall, but Android users may hit the limit more often even though the number went up, because Android source files tend to be larger. So a raw phone clip that went through last year can now fail. Don't count on the app to shrink it for you: compress it first.

How do you calculate the right bitrate?

File size is roughly bitrate multiplied by duration, so you can work backward from your target:

  1. Multiply your target size in MB by 8,000 to get kilobits.
  2. Divide by the clip's length in seconds.
  3. Subtract your audio bitrate. 96 kbps is a sensible figure for speech and game audio.
  4. Use what's left as your video bitrate.

For a 60-second clip on a free account: 19 × 8,000 = 152,000 kilobits. Divide by 60 for 2,533 kbps, subtract 96 and you get about 2,437 kbps, so round down to 2,400.

Here are the results worked out for common lengths, with 96 kbps audio:

Clip lengthVideo bitrate at 19MB (free)Video bitrate at 47MB (Nitro Basic)Resolution to try on free
15 seconds10,037 kbps24,971 kbps1080p
30 seconds4,971 kbps12,437 kbps1080p
60 seconds2,437 kbps6,171 kbps720p
2 minutes1,171 kbps3,037 kbps720p or 480p
3 minutes748 kbps1,993 kbps480p
5 minutes411 kbps1,157 kbps480p, or trim it

The resolution column is a starting point, not a rule. Fast game footage needs far more bitrate than a screen recording of a slide deck, so drop a step if your output looks blocky.

How do you compress a video for Discord with HandBrake?

HandBrake is free and open source, and it's the easiest option if you'd rather not touch a command line. It runs on Windows, Mac and Linux, and your file stays on your computer.

  1. Open your video in HandBrake.
  2. On the Summary tab, set the format to MP4.
  3. On the Dimensions tab, set the resolution you picked from the table above.
  4. On the Video tab, choose H.264 (x264) as the encoder.
  5. Choose Avg Bitrate and enter your video bitrate from the table.
  6. Turn on Multi-Pass Encoding.
  7. On the Audio tab, set the bitrate to 96.
  8. Start the encode and check the final size.

Skip the Constant Quality slider here. HandBrake's own documentation recommends constant quality for most work, but makes an exception for when you need a specific file size, and that's exactly the job here. It also recommends multi-pass encoding when you use average bitrate.

How do you compress a video for Discord with ffmpeg?

ffmpeg is the most exact method, and two-pass encoding is what makes it reliable. The first pass studies the video, and the second spends the bitrate where it's needed.

On Windows, run these two commands one after the other:

ffmpeg -y -i input.mp4 -c:v libx264 -preset medium -b:v 2400k -vf "scale=-2:720,fps=30" -pass 1 -an -f null NUL
ffmpeg -i input.mp4 -c:v libx264 -preset medium -b:v 2400k -vf "scale=-2:720,fps=30" -pass 2 -c:a aac -b:a 96k -movflags +faststart output.mp4

On Mac or Linux, replace NUL at the end of the first command with /dev/null.

What the settings do:

  • -b:v 2400k is the video bitrate from your calculation.
  • scale=-2:720 resizes to 720p and keeps the shape of the frame.
  • fps=30 caps the frame rate, which helps a lot with 60 fps recordings.
  • -b:a 96k sets the audio bitrate.
  • +faststart moves the file's index to the front, so playback can begin sooner.

We ran these commands with ffmpeg 9.0.2 on a deliberately hard source: a 60-second, 1080p, 60 fps test clip with heavy noise, 4.45GB in size. The output was 18.6MB at 720p and 30 fps, which fits under the free limit.

For comparison, we also tried a single-pass CRF 26 encode on the same clip and got 57.4MB. CRF aims for a quality level, not a size, so it's the wrong setting when you have a hard limit. A noisy test clip is close to a worst case, and real footage will often come in smaller with CRF, but only a bitrate target gives you a predictable result.

Is there a shortcut for ffmpeg?

Yes. ffmpeg4discord is a free command-line tool that does the arithmetic for you. Install it with pip install ffmpeg4discord, then run ff4d input.mp4 -s 18. Its default target is 10 MiB, so set -s yourself. The number is in MiB rather than MB, so 18 MiB comes to about 18.9MB, which fits the same safe target.

Which method should you use?

MethodBest forYour file stays on your device?Hits a target size?
HandBrakeRegular use without a command lineYesClose, with Avg Bitrate
ffmpegExact control and batchesYesClose, with two-pass
ffmpeg4discordQuick command-line jobsYesYes, it's built for it
Tella's compressorOne-off clips in a browserYes, its page says it compresses locallyYes, but it offers 10MB, 50MB or 500MB
8mb.videoOne-off clips, and it has a 20MB presetNo, it runs on a server and says files are deleted after 90 minutes or once downloadedYes

Browser tools are fine for a clip you don't mind sharing with a third party. For anything private, use a tool that runs on your own machine. Before you pick a browser tool, look at which size it offers: the ones built around 10MB leave half your free limit unused.

What if the video is still too big?

Bitrate isn't the only setting you can change. In order of how much quality they cost you:

  1. Trim it. This usually helps most, because every second you cut gives the rest more bitrate. To cut a clip without re-encoding, use ffmpeg -ss 00:00:10 -to 00:00:40 -i input.mp4 -c copy clip.mp4. The cut can land slightly off because it snaps to the nearest keyframe: our 30-second test came out at 30.008 seconds.
  2. Lower the frame rate. Going from 60 to 30 fps rarely hurts anything except fast gameplay.
  3. Drop the resolution. 720p on a phone screen or in a Discord chat window often looks fine.
  4. Remove the audio. If the clip doesn't need sound, swap the audio settings for -an.
  5. Try H.265. Discord lists HEVC/H.265 and AV1 as supported MP4 codecs, and both can look better than H.264 at the same size. They encode more slowly, though, and older devices may struggle to play them, so we'd stick with H.264 unless you need the extra room.
  6. Share a link instead. For long videos, upload to YouTube or a cloud drive and paste the link. No compression will make a 20-minute 1080p video look good in 19MB.

If you recorded in OBS or another tool that saves MKV, re-encode to MP4 while you compress. Discord's FAQ lists MP4 and MOV among its common file types, and it doesn't list MKV there.

Will compressing ruin the quality?

It will cost some quality, and how much depends on the bitrate each second gets. A 20-second clip on a free account has plenty of room. A 5-minute clip has about 411 kbps, which looks soft whatever tool you use.

Text is the first thing to break down, so if your clip has captions or on-screen text, check them in the output before you post.

And keep your original file. Compression can't be undone, so work on a copy. If a low-quality copy is all you have left, an AI upscaler can rebuild some detail. Kenerate's HD video converter takes clips up to 5 minutes and about 100MB, but its output is a higher resolution and that usually means a bigger file, so it won't help you get under Discord's limit. It's a tool for recovering a clip, not for fitting one.

Making Discord content from scratch?

If you're building up a server, short clips and images are easiest to share. You can make a short clip with an AI video generator and run it through the steps above if it's over your limit, design a profile picture with the Discord PFP maker, or read our guide to AI image generators for Discord.