BPM in music stands for beats per minute, the number of steady pulses that fit into 60 seconds. It's the standard way to state tempo: 60 BPM is one beat every second, and 120 BPM is two. A higher number means faster music.

This guide, written as of 5 November 2026, explains what a beat actually is, how BPM differs from tempo, how to turn BPM into seconds, and what range each genre usually sits in. If you already know the definition and just need a number for a specific track, the companion guide on how to find the BPM of a song covers six ways to measure it.

What does BPM mean in music?

BPM counts beats, and a beat is the pulse you'd nod your head or tap your foot to. It isn't every note, and it isn't every drum hit. A hi-hat can play four notes for each beat while the beat itself stays slow, which is why a busy track can still have a low BPM.

Which note counts as the beat depends on the time signature. Wikipedia's tempo article puts it simply: the beat is typically the note value shown by the bottom number of the time signature, so in 4/4 it's a quarter note. Most pop, rock and dance music is in 4/4, so "120 BPM" usually means 120 quarter notes a minute.

Compound time is the common exception. In 6/8 the beats are split into three, and musicians usually feel two beats per bar, each a dotted quarter note. A 6/8 piece marked "dotted quarter = 60" has 60 felt beats a minute, even though 180 eighth notes go by in that time. When the note value matters, sheet music states it next to the number.

What is the difference between BPM and tempo?

Tempo is the speed of the music. BPM is the unit used to measure that speed. It's the same relationship as speed and miles per hour: one is the idea, the other is the number.

Tempo can also be described without a number. "Allegro" or "slow and heavy" both describe tempo, but neither tells you exactly how fast to play. BPM does, which is why a drummer, a DJ and a video editor can all agree on "128" without any further discussion.

BPM also differs from rhythm. Rhythm is the pattern of long and short sounds. Two songs at 90 BPM can have completely different rhythms, and the same drum pattern can be played at any BPM.

TermWhat it meansExample
BeatOne pulse of the musicThe "1, 2, 3, 4" you count
BPMHow many beats fit in a minute120 BPM
TempoHow fast the music movesFast, slow, allegro, 120 BPM
RhythmThe pattern of sounds over the beatA swung hi-hat pattern
Time signatureHow beats are grouped into bars4/4, 3/4, 6/8

Where did BPM come from?

Before the metronome, composers wrote tempo in words, usually Italian ones. Johann Maelzel patented a mechanical metronome in 1815, and numeric tempo marks spread through the first half of the 19th century. Beethoven was one of the first composers to use them, publishing metronome marks for his first eight symphonies in the 1810s.

You'll still see this in scores as "M.M." (Maelzel's Metronome) followed by a note value and a number, such as M.M. quarter note = 60. Mechanical metronomes usually run from 40 to 208 BPM. Our free online metronome goes from 40 to 240 BPM in the browser.

The old Italian words never mapped neatly onto numbers, and sources still disagree about them. Here's how two references compare:

MarkingMeaningWikipediaDolmetsch
LargoBroad, very slow40–66 BPM42–66 BPM
AdagioSlow, expressive44–66 BPM58–97 BPM
AndanteWalking pace56–108 BPM56–88 BPM
ModeratoModerate speed108–120 BPM66–126 BPM
AllegroFast and bright120–156 BPM84–144 BPM
PrestoVery fast168–200 BPM100–152 BPM

Dolmetsch's table also lists alternative figures from other sources, some of them far apart. Its presto, for example, also appears as 168–208. Treat these words as a character and a rough zone rather than an exact number. A fast andante and a slow allegro can be closer together than the names suggest.

How do you convert BPM to seconds?

Divide 60 by the BPM to get the seconds per beat. For milliseconds, divide 60,000 by the BPM. To go the other way, divide 60 by the seconds per beat.

Seconds per beat = 60 ÷ BPM

BPM = 60 ÷ seconds per beat

So at 100 BPM, each beat lasts 0.6 seconds. A gap of 0.75 seconds between beats means 80 BPM. Here are the numbers for common tempos, with frames at 24 fps for anyone cutting video to music:

BPMSeconds per beatMilliseconds per beatOne 4/4 barFrames per beat at 24 fps
601.000 s1,000 ms4.00 s24
800.750 s750 ms3.00 s18
1000.600 s600 ms2.40 s14.4
1200.500 s500 ms2.00 s12
1400.429 s429 ms1.71 s10.3
1740.345 s345 ms1.38 s8.3

The same maths answers some practical questions:

  1. Delay time: a quarter-note delay at 120 BPM is 500 ms, an eighth-note delay is half that (250 ms).
  2. Section length: 32 bars of 4/4 is 128 beats. At 120 BPM that's 128 ÷ 120 = 1.07 minutes, or 64 seconds.
  3. Video cuts: at 120 BPM and 24 fps, a cut every 12 frames lands on every beat, and a cut every 48 frames lands on every bar.
  4. New song length: speeding a song up from 100 to 120 BPM is a speed of 1.2, so a 3:00 track becomes 2:30.

What BPM is each genre?

Most genres have a typical zone, but no two references agree exactly. This table puts three side by side. A dash means that source doesn't list the genre.

GenreAbletoniZotopeMusical U
R&B——60–80
Reggae——60–90
Hip-hop60–10085–9585–115
Pop——100–130
Rock——110–140
Metal——100–160
House115–130115–130118–135
Techno120–140120–125120–160
Dubstep135–145140Around 140
Drum and bass160–180174165–185

Figures come from Ableton's Learning Music, iZotope and Musical U. Ableton groups techno with trance.

Dance-led genres have tight ranges because DJs mix tracks together and the tempos need to sit close. Song-led genres are much looser. Orphiq's genre chart gives pop 60–140 and rock 80–160, far wider than Musical U's figures, and both are fair: a ballad and a dance-pop single are both pop. BPM alone rarely tells you the genre. The drum pattern and the arrangement do more of that work.

What is half-time and double-time?

Half-time and double-time are why the same track can honestly be called two different numbers. iZotope lists dubstep at 140 BPM with a "half time, 70 BPM feel": the track runs at 140, but the snare falls so far apart that your head nods at 70.

The reverse happens too. A slow hip-hop beat with fast hi-hats can read as double its felt tempo. Neither number is wrong, so the choice comes down to what you need it for. DJs and producers usually stick to the number their genre uses, such as 140 for dubstep and 174 for drum and bass, even if the groove feels slower.

Software has the same problem. Our BPM key finder searches 60–200 BPM and shows half- and double-time options next to its estimate, because automatic detection can land on either. Our tap tempo tool has ÷2 and ×2 buttons for the same reason.

Does every song have one BPM?

No. Plenty of music changes speed, and some has no fixed BPM at all.

  • Live recordings without a click drift a little as the band speeds up or relaxes, so a stated BPM is an average.
  • Rubato is the deliberate stretching of time in expressive playing, common in solo piano. A single number means very little here.
  • Tempo changes can happen between sections, such as a half-speed bridge or a finale that speeds up.
  • Free or ambient music may have no steady pulse to count.

Tracks made on a computer against a grid are the opposite. They usually sit on one exact number from start to finish, so a tap or an automatic reading is easiest on those.

Why does BPM matter?

The number is useful in more places than the studio:

  • Practice: musicians slow a hard passage down, then raise the BPM step by step until it's at full speed. A metronome keeps that honest.
  • DJing: two tracks need matching tempos to blend. Small changes to the BPM keep them locked together.
  • Production: a project's BPM sets the grid that drums, loops and delay effects sync to.
  • Video editing: knowing the BPM tells you exactly where the beats fall, so you can cut on them without guessing.
  • Mood: tempo shapes how a piece feels, though it's only one factor. A slow track can still feel tense, and a fast one can feel calm.

How do you change or choose a BPM?

To change the speed of an existing song, use time-stretching, which alters tempo without changing pitch. Simple speed changes raise the pitch as well, like a record spinning too fast. Our free BPM changer handles 50% to 150% of the original tempo and runs in your browser, so the file stays on your device. Small moves tend to sound the most natural.

To choose a tempo for something new, start with the genre table above, then tap out the speed that feels right and read the number. If you want an original track at that tempo, put the BPM in your prompt in our AI music generator, for example "deep house instrumental, 124 bpm, warm bass". AI engines land close to the requested tempo but not always exactly on it, so check the result if the number matters.

Sources