Last Set
Made with Ken Music 1.5 · Hear what bitrate does to brushed drums
PromptJazz piano trio, swinging piano solo, upright bass, brushed drums, late-night club, 132 bpm


Free · no upload · up to 250 MB
Turn a big WAV into an MP3 you can email, upload or play almost anywhere. At 128 kbps a normal WAV gets about 11 times smaller. It all happens in your browser, so nothing is uploaded, and there's no account or watermark.
Converted on your device, never uploaded
Updated ·![]()
![]()
![]()
by the Kenerate AI team
On this page
Quick answer
Updated

To convert WAV to MP3, choose your file in the tool above, pick 128, 192 or 320 kbps, then press Download MP3. Your browser does the work, so the file is never uploaded, and it's free with no account. It takes WAV files up to 250 MB, about 24 minutes of CD-quality stereo. The MP3 comes out 4 to 11 times smaller, depending on the bitrate. Pick 192 kbps if you aren't sure.
Listen first
Real AI generations from the Music Studio. These are already MP3s, but the converter opens them too, so you can try a lower bitrate.
Made with Ken Music 1.5 · Hear what bitrate does to brushed drums
PromptJazz piano trio, swinging piano solo, upright bass, brushed drums, late-night club, 132 bpm
Made with MiniMax Music 3.0 · A beat to send to a friend
PromptClassic boom-bap hip-hop beat, dusty kick and snare, chopped soul sample, deep bass, head-nod groove, 90 bpm
Made with MiniMax Music 3.0 · Busy mixes show compression first
PromptBig-room EDM festival track, huge build-up, massive drop with punchy kick and lead synth, crowd energy, 128 bpm
How to
Step 1
Pick a file up to 250 MB. It opens on your device.
Step 2
128 kbps suits speech, 192 kbps suits most music, and 320 kbps keeps the most detail.
Step 3
Press Preview to hear it. The tool also shows the length and the MP3 size.
Step 4
It saves under the same name with an .mp3 ending. Your WAV isn't changed.
See it in the app

Open Music Studio and pick a song from a prompt, a song from your lyrics, or an instrumental.

Write the genre, mood, instruments and tempo, or tap a genre chip and Ideas to get started.

Keep Ken Music as the model and choose a quick clip or a full song of up to about three minutes.

Press Make to create the track — it appears in your tracks when it is ready.

Open a finished track with its cover art to play it, download it or use it in a video.
Prompt & lyrics to song, instrumentals, models, your tracks & chat
Chapters
Engines
Facts from the app's engine list, for when you'd rather make a track than convert one.

ElevenLabs
Best for
Set the exact duration; clean studio mix

Kenerate
Best for
Quick clips — hooks, jingles, intros

Kenerate
Best for
Default engine: full songs with vocals in any language; can take an image as inspiration

MiniMax
Best for
Follows [Verse]/[Chorus] section tags closely
Prompt recipe
Open any of these in the Music Studio if a new track would suit you better than a converted one.
Podcast bed
Calm background music for a spoken podcast, soft plucked guitar, light percussion, steady
Intro sting
Short bright podcast intro sting, clean electric piano and light drums, ends on a warm chord
Video background
Upbeat background music for a short video, clean electric guitar and hand claps
Study loop
Gentle lofi study loop, warm piano, vinyl crackle, slow steady beat
Tips
A few things that save a second try.
Keep your WAV. It's the full-quality copy, and an MP3 can't be turned back into it.
Make every edit in the WAV first, then export the MP3 last, so the audio is only compressed once.
Tags and cover art aren't copied, so add them again in your music app if you need them.
Only need one section? Cut it with the audio trimmer first, then convert the WAV it saves.
Only convert audio you have the right to use.
FAQ
10 questions
Choose your file in the converter at the top of this page, pick a bitrate, then press Download MP3. It's free, with no account and no watermark.
Link to this answerNo. Your browser decodes the file and builds the MP3 on your device, so the audio never reaches our servers. The only download is the small encoder itself, which the page fetches the first time you export.
Link to this answerA CD-quality stereo WAV takes about 10.6 MB a minute. The MP3 takes 0.96 MB at 128 kbps, 1.44 MB at 192 kbps and 2.4 MB at 320 kbps, so it's about 11, 7 or 4 times smaller. Our three-minute test WAV went from 31.75 MB to 2.88 MB at 128 kbps.
Link to this answerYes. WAV usually holds uncompressed audio, and MP3 is lossy, so some detail is removed for good. At 192 kbps or above, most people won't notice on everyday music. Keep the WAV if you may need the full quality later.
Link to this answerUse 128 kbps for voice and talk podcasts, 192 kbps for most music and podcasts with music, and 320 kbps for a mix you care about. If you aren't sure, 192 kbps is a sensible default.
Link to this answer250 MB, which is about 24 minutes of CD-quality stereo. Higher-resolution files run out sooner: about 12 minutes of 32-bit float at 44.1 kHz, or 7.5 minutes of 24-bit audio at 96 kHz. A 262 MB WAV worked in Edge on a desktop. We haven't tested phones, which have less memory.
Link to this answerYes. In our tests 24-bit 96 kHz and 32-bit float WAV files opened in Edge. The MP3 is always 44.1 kHz, so higher sample rates are resampled on the way.
Link to this answerWAV is a container, so the audio inside can vary. Ordinary PCM files worked in our tests, while a compressed Microsoft ADPCM WAV failed in Edge. For those, try ffmpeg: ffmpeg -i input.wav -b:a 192k output.mp3
Link to this answerNo. The MP3 holds audio only, so any tags in the WAV aren't copied. Your music app or a tag editor can add them.
Link to this answerNo, this tool handles one file at a time. For a big batch, a desktop tool such as ffmpeg will be quicker.
Link to this answerIn depth
What works, what to avoid, and how the pieces fit.
WAV is a container that most often holds uncompressed PCM audio [1], which is why the files are so large. CD-quality stereo needs 1,411 kbps, or about 10.6 MB a minute. MP3 uses lossy compression to remove detail that listeners are less likely to notice [2], so it needs far less space.
That trade only goes one way. Going from WAV to MP3 is a single lossy step, so it's the cleanest way to make an MP3. Going back with the MP3 to WAV tool gives you a bigger file but doesn't restore what was removed.
This tool writes a constant bitrate, so the MP3 size depends only on the length. These figures compare with a CD-quality stereo WAV.
WAV size depends on the sample rate, bit depth and channels, so the same limit covers different lengths. The tool checks the file size, not the length.
When you choose a file, the browser reads it from your disk and decodes it to raw audio in memory. The first time you export, the page fetches a 133 KB copy of the LAME MP3 encoder [3] from our site, and that encoder turns the audio into an MP3 on your device. Audio only travels from your disk to your browser, and closing the tab clears it.
The MP3 is always 44.1 kHz, so a 48 or 96 kHz file gets resampled. Mono files stay mono, and a surround file keeps only its first two channels.
We timed the converter's decode and encode steps on 5 November 2026 in Edge on one Windows desktop, using generated test tones. Real music may take a little longer, and we haven't measured phones, Safari, Firefox or Chrome.
This converter suits one file you want to keep private. Use something else in these cases:
By the Kenerate AI team·Last updated and reviewed
We build and run the Kenerate Music Studio. Every demo on this page is a real output of the engine named on it, made from the prompt shown; engine facts were checked against the app's code.
Sources: wasm-media-encoders (LAME compiled to WebAssembly; LAME is LGPL) · FFmpeg documentation

Free to start. No watermark. Download every track.
Tried it? Tell us how it went


